Buying guide

How to Choose a UHF RFID Tag

What to look at: chip and memory, antenna size and range, form factor, surface (metal/liquid) and standard. So the tag reads where you need it.

UHF860–960 MHz, EPC Gen2
up to mread range
metalanti-metal tags
GS1SGTIN-96

What a UHF RFID tag is

A UHF RFID tag is a passive radio tag in the 860–960 MHz band (EPC Gen2 standard) with no battery: it draws power from the reader and sends back its code. An identifier of the item or asset is written to the tag memory (EPC). The key thing when choosing is that the tag reads reliably at the required distance and on your surface: a paper label on a cardboard box and a tag on a metal rack are different tags.

Selection criteria — checklist

  • Frequency and standard: for Uzbekistan — UHF 860–960 MHz, EPC Class1 Gen2 chip (ISO 18000-6C).
  • Surface: an ordinary tag does NOT read on metal and liquids — anti-metal tags are needed there.
  • Antenna size and range: the bigger the antenna, the longer the range; choose to the scenario (shelf, gate, warehouse).
  • Form factor: label, hard tag, card, embeddable tag — to the object and mounting method.
  • Memory: EPC size (usually 96/128 bits) and user memory if you need to write extra data.
  • Environment: temperature, moisture, UV, abrasion — for outdoor/warehouse pick durable materials (PET, special adhesive).
  • Data standard: writing by GS1 (SGTIN-96) — compatibility with the labeling ecosystem and partners.
  • Volume and cost: labels are cheaper for mass; anti-metal and hard tags cost more but last longer.

Tags + hardware + software — for the task

Buying tags is not enough — they must be written and read correctly. Our UHF RFID terminal reads and writes tags, and the BT_T software writes them by the GS1 standard (SGTIN-96) and runs the accounting: inventory, receiving, labeling. For fixed assets — BT_OC. We match tags to your surfaces and scenario and configure the writing so everything reads reliably.

FAQ

Which tag to choose for metal?

An ordinary label barely reads on metal. You need anti-metal tags — they have a layer that spaces the antenna away from the metal and ensures stable reading.

At what range does a UHF tag read?

It depends on antenna size, reader and surface — from tens of centimeters to several meters. Shelf and gate scenarios use different tags.

Can an RFID tag be rewritten?

Yes, EPC memory is rewritable. We rewrite factory tags to the client catalog so that scanning shows the item by name.

How does a tag differ from a barcode?

A barcode reads one at a time with line of sight; an RFID tag reads in bulk and contactlessly. See the article "RFID or barcode".

How much data fits in a tag?

The EPC is usually 96 bits (enough for a unique GS1 identifier). If you need more, choose tags with extra user memory.

We will pick RFID tags for your surfaces

Free consultation: we determine the tag type, range and writing for your accounting scenario.

Get tags picked
Contact
us
Contact
us
We work across all of Uzbekistan
Mon–Fri, 09:30–18:00
Яндекс.Метрика