Comparison

RFID or Barcode: Which to Choose

How the technologies differ, what is faster and cheaper, when RFID is justified and when a barcode is enough — and why they are often used together.

×10+RFID faster on inventory
noline of sight
cheaperbarcode to start
togetherBC + RFID in one terminal

In short: the difference

A barcode is an optical mark: the scanner must "see" each code one at a time, with line of sight. Cheap, reliable, universal. RFID is a radio tag: the reader catches dozens of tags at once, contactlessly, even through packaging, and you can write data to the tag. RFID costs more but dramatically speeds up mass operations. It is not either-or: modern accounting often combines them, and a single terminal handles both.

Key differences

  • Speed: barcode — one tag at a time; RFID — dozens of tags per second.
  • Visibility: a barcode has to be aimed and "seen"; RFID reads without line of sight, through packaging.
  • Range: barcode — centimeters; UHF RFID — from a meter to several meters.
  • Data: a barcode holds a fixed code; an RFID tag can be rewritten and hold more data.
  • Cost: a barcode is almost free (printing); RFID tags and hardware cost more.
  • Reliability: barcodes suffer from dirt/wear; RFID resists dirt but is sensitive to metal/liquid (special tags needed).
  • Scale: counting a zone by barcode takes hours; by RFID — minutes.

One terminal — both formats, plus software

Our data terminals read 1D/2D barcodes and work with UHF RFID in one device — no need for two. And the BT_T software runs warehouse operations for both formats: receiving and shipping by barcode, mass inventory by RFID, tag writing by the GS1 standard. For fixed-asset accounting — BT_OC. We will pick the hardware-plus-software bundle for your scenario.

FAQ

What is cheaper — RFID or barcode?

To start, a barcode is cheaper: printing a label costs almost nothing and scanners are affordable. RFID costs more (tags + readers) but pays off at scale through inventory speed and fewer errors.

Will RFID fully replace the barcode?

Usually not. Barcodes remain for item-by-item operations and checkout; RFID is added where mass, contactless reading is needed. Most often the technologies coexist.

Why is RFID faster on inventory?

The reader catches dozens of tags per second without line of sight — no need to aim a scanner at each item. Counting a zone takes minutes instead of hours.

Does RFID work on metal and liquids?

Ordinary tags read poorly on metal and liquids. For such surfaces there are special "anti-metal" tags — choose those for the task.

Do I need two devices for barcode and RFID?

No. A modern terminal reads both barcodes and UHF RFID in one device, and BT_T works with both formats.

We will pick the technology for your task

Free consultation: we review your processes and advise what is better — barcode, RFID or a mix.

Get a consultation
Contact
us
Contact
us
We work across all of Uzbekistan
Mon–Fri, 09:30–18:00
Яндекс.Метрика